5 Stars By Matt Henderson on 2017-03-16
Both the precision screwdriver set and kit are both excellent values, but the kit is a better value
I bought this toolset when I needed a precision screwdriver tip that I did not have plus the ones I did have were a bit worn out. This kit certainly fixed that!
The description calls this 74 in 1, but I count more. The precision screwdriver kit is actually 61 pieces counting the plastic case, the other tools number 17, plus the nylon organizer pouch make this a 79 in 1 kit. The precision screwdriver kit is available separately for $14, versus the $30 for this kit so the extra 18 pieces cost you $16, or, a little less than $1 per additional tool. Both the precision screwdriver set and kit are both excellent values, but the kit is a better value, especially if installing or removing small fasteners is all you need.
All the tips are 4mm hex tips.. As you can tell from the photo, there nine bit holders, each with a capacity of 6 bits. Two bits I found loose at the top of the case giving 56 different bit drivers. Here is the inventory
Hex 0.9, 1.3, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, and 6.0 mm
Nuts 2.5, 3.0, 3.5, 4.0, 4.5, and 5.0 mm
Flat 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, and 4.0 mm
Torx T3, T4, T5, T6, T7, T8, T9, T10, T15 and T20
+ 1.0, 1.5, 2.0, 2.5, 3.5 plus J000, J00, J0, and J1
5 0.8, 1.2, 1.5, 2.0
Sqr SQ0, SQ1, SQ2
Y 0.8, 2.0, and 3.0
Adpt 4 mm to 1/4" hex adapter
The Phillips heads are included in the category "+", as well as the J series + bits that have a deeper + recess in the screw. The bits marked 5 look like a five pointed star of David. "Sqr" bits are square in shape. I assume that last 3 or 4 categories are only used as a manufacturers attempt to limit access..
The screwdriver handle measures 120mm. The handle has a comfortable variable diameter, a non-slip rubberized grip that, and the obligatory rotating finger rest for a precision driving tool. For reasons I do not understand, it has two 5 mm hex receptacles just beneath the finger rest; if it was 4 mm, it could have provided a way to turn bits. The bit holder adds 26 mm reach and can telescope to 43, 60, 77, and 94 mm and will fit through a hole a minimum of 8.2 mm. Using the flexible bit holder adds 138 mm to the reach, although the rotating sleeve requires a hole a minimum of 10.0 mm. A more likely use scenario is to bend the flexible bit holder, in which case this extension allows a screw or nut to be driven inside a box with an internal dimension as little as 75 mm versus 135 mm required with just the handle.
Besides the precision screwdriver kit, the set includes
Tweezers (3) - metal with conducting handle. Two of these have tips so fine that they could easily break your skin. Even the blunt tipped one has a finer tip than most medical tweezers.
Splugers - 3 metal splugers with spade tip on one end, and rounded tip on the other. 4 plastic splugers for prying plastic cases, two widths.
Probe - rigid black plastic (might be conductive), one end with a pencil point, the other with a flat scraper.
Triangle plectrum - Pry a plastic case, or strum a guitar... your choice ;-)
Retractable utility knife
Metal straight edge/ruler, measures to 155 mm or 6"
Suction cup with metal ring for handling LCD screens
SIM ejector tool
Anti-Static Wrist Strap with coiled grounding wire. Snap attachment to wrist strap and alligator clip
Nylon case - Holds all 78 parts of this set. Two loops for hanging the case, plus, a wrist strap
4 Stars By Greg on 2016-11-27
Nice Electronics Tool Kit, But A Few Minor Issues
As a computer technician, I am always needing screwdrivers and tools to take apart various electronic devices. It seemed to be a very reasonable price for what was in the tool kit, and I had high expectations from the many favorable reviews. Here is what I found:
Very Versatile Screwdriver Set - This will accommodate many shaped screws. The magnetic tip on the screwdriver is very convenient when pulling screws out or lining up screws with the hole.
When opening the screwdriver kit new out-of-the-box, there were noticeable scratch marks all along the black paint on the metal end of the screwdriver. This made it almost seem used, though there is no other wear on the screwdriver...will have to see how long it holds up.
When I received the screwdriver kit, the flexible extension rod's end was completely bent, making it almost unusable. Also, the extension rod did not fit into the screwdriver case correctly, keeping the case from snapping shut correctly. It has since been removed from my kit because the case won't stay shut with it in there.
Nice Metal Tweezers - There are many different types and sizes. They all feel high quality and have a nice weight.
Spudgers - There are three metal spudgers, all of which are good for popping cases of electronics. There are many different shapes and size, and some are bent (intentional). There is also one pencil-like spudger that is not metal, though still solid and durable feeling.
Plastic Opening Tools and Triangle Plectrum - The plastic opening tools are nice and easy to use. Only worry is on how long it will last...They may crack and break when popping cases open. The triangle plectrum is high quality and a nice addition to this kit.
Utility Knife and Ruler - Both are very nice with no issues.
Suction Cup and SIM Card Ejector - No issues with either of these parts.The SIM Card Ejector is very helpful, especially if your phone didn't come with one.
Anti-Static Wrist Strap - When mine came in, the band was completely frayed and the threads were coming out. The quality is very poor, and it doesn't seem it will work much longer.
Overall, the value is very good for the price, and many of the parts are of good quality. However, there were many downfalls that included the scratched screwdriver, the bent extension rod, and the fraying antistatic wrist strap that were included in my kit. I would recommend this product to a friend with these few precautions.
The screwdriver kit's tips are cheaply made and will bend and break if turned too hard. I found this out when turning a tight screw, after which, the screwdriver's tip was completely bent and destroyed.
4 Stars By William Houston on 2017-01-18
Most of the components of this set are VERY nice. The screwdriver set is good
Most of the components of this set are VERY nice. The screwdriver set is good, as are the tweezers and plastic pry bars. The metal spudgers leaves something to bed desired, but over all this is a very nice kit, and I have purchased multiple.
4 Stars By Future Flashback on 2017-03-14
Overall good set
So far this has been a pretty good tool set. I've taken apart a few laptops at work and haven't run into any functionality problems. The biggest drawback so far is plastic tray inside the plastic case that holds all the bits and screwdriver. The tray is made of very thin and flexible plastic that I could probably tear without much force. If it was replaced with something a bit more rigid/durable, this would be a 5 star set for sure.
5 Stars By CDH on 2017-01-10
Great tool set!
Great tool set! I used it to add a cooler to my GPU and it worked very well! The screwdriver set is very good quality, which was the biggest concern for me. The pouch is very helpful for keeping it all organized. I would definitely recommend this set to anyone looking for an inexpensive set for doing work on a computer.
5 Stars By Luke Thiele on 2017-08-29
4.75/5, Outstanding value for the price
I have had my kit for a few weeks and have absolutely loved it so far. I work almost exclusively on desktop and laptop hardware, so I thought that this kit might be a bit overkill. As fortune always has it, we had a few tablets crash at work and all the mobile device tools immediately justified their purchase.
Everything seems to be pretty sturdy and well-built so far, with a few exceptions. the tray for the screwdriver and bit holders is pretty flimsy plastic, and the bit holders are a little too loose-fitting. If my bag gets jostled as I'm on the go, there's usually one or two bits that get dislodged, but are at least pinned near their correct location thanks to the lid. The suction cup attached to the SIM card tool was also warped and doesn't work, but that specific piece is completely insignificant to me.
Overall, 4.75/5. Amazing bang for your buck. I bought a second screwdriver set just because I wanted to have a dedicated set for my home lab.
3 Stars By AJC on 2017-01-23
Oria 74 in 1 Precision Screwdrive Set
First, the plastic container that holds the bits is made of very flexible soft plastic. The bits fall out of their slots when you open the case. The plastic suction cup was warped and would not hold onto the glass. Maybe over time it would regain it's shape. However, the bit holder is a problem for me. I returned the item because I really needed a good kit. Right now the whole idea is on hold.
Update - 4 Feb 2017! I have been informed that the manufacturer is working on upgrading this item with better material. If so, then I will repurchase it. Right now I am holding off to see how that works out. As a NOTE, I prefer to give the company a chance to improve it's product. The kit had all of the right tools, so I am very hopeful.
3 Stars By AlumiGogo Customer on 2017-08-01
Looks great!.. or, maybe not?
I ordered the 76-in-1 kit recently, and when it arrived the first thing I noticed was the quality of the driver bits. They were all stamped, and appeared to be well made. I continued looking at the product, however, and found that somehow the flexible extension for the driver was defective. The end where I would put the driver bits was perfectly round, inside and out! On top of being round, the bits would not fit into it (not that it would have done any good if they did, seeing as how they would have just spun since there are no sides to lock the bit in place). My thoughts are that the manufacturer just missed a step, where they grind out the sides so the hex drivers fit in. Everything else seems to be decent, though the ruler is somewhat difficult to fit into the sleeves, and the razor is not well made at all (I just tossed it). Thankfully I don't see the flex-extension as being much of a problem for me, but I would definitely have rated higher if it had been properly made.
5 Stars By Andrea on 2017-01-22
Complete set of tools
The first shipment of this product only came with the driving bits, but the supplier's customer service was very friendly and helpful in shipping me a complete replacement set. This new package has everything I've expected. While I do agree with the previous reviews that the plastic case holding the drive bits is of is of cheap quality, the tools themselves look durable. I just upgraded my RAM and SSD hassle-free using this kit.
----- Previous Review -----
I only received the 54 piece screwdriver set and the carrying case. I didn't receive the other 20 pieces. Returning because of faulty advertising/packaging.
On the plus side, the screwdriver kit works well, and it seems to be of quality construction.
4 Stars By DS321 on 2017-03-11
Solid small tool set
This is a great set. I used it in building a new PC. I even bent a prong on one of the USB3.0 connections and used some of these tools to repair it. The case with the different bits is very nice and the driver feels good. (Heads up, the solid extension is inside the nut driver. You have to pull down the sleeve at the base of the handle and pull out the extension.) The anti-static tweezers feel good in my hand (big hands.) The pouch everything comes in is GREAT!!!
Cons: the flexible extension is so/so. I just made the solid extension work. To be perfect, somehow add in a small set of cutters and needle nose (not the combo.)