5 Stars By ccscotty06 on 2016-11-17
Great Product and quality! I built a roof out of 16GA Sheet metal for my Polaris Ranger, and this lined the edges absolutely perfect
5 Stars By Nick on 2017-03-28
Best advice I can give is to make sure you ...
I bought this to replace the aging PVC trim guards for my car doors.
I didn't want to use trim guards that use adhesive to hold themselves on, as they are problematic during hot months of the year.
This holds on to the door edge REALLY tightly, and having an aluminum core, I don't need to worry about it rusting.
Best advice I can give is to make sure you have a good pair of metal snips. This comes as a big coil, and you'll need a clean way to cut it.
5 Stars By Dada on 2017-08-18
great quality product
This is great, just what I was looking for. Strong but flexible at the same time, I needed an edging for an art project to protect the edge of a 1/2 plywood sheet from chipping and this does the job. If you have a 90 degree corner it won't work, but it bends enough for gently curved edges.
A bit expensive but worth it. Just in case, I used Iron grip sealant as well to make sure it stays in place and screwed it in a few places.
5 Stars By John W. on 2017-10-22
Worked great on my 3/4 inch plywood outdoor bar.
5 Stars By Phillip Forslund on 2017-03-14
Great fit and great product
I needed this product to repair blow-molded golf bag carriers because the original trim had come loose (and the previous owner had tried to epoxy the trim back into place). I measured the thickness of the carrier and ordered the edge trim accordingly. After cleaning off all of the epoxy residue, I sanded and pre-cleaned the mounting surfaces. Then I used 3M automotive weatherstrip adhesive to provide a permanent bond and used vice grip pliers to secure the final seam until the adhesive cured. Great fit and great product.
5 Stars By Mont on 2017-10-11
Flexible, Professional quality product...
I used this as edging on a home made magnetic white board and chalk board combo. One side is dry erase, while the other is chalk board. I used sheets if galvanized steel on both sides of a 1/4 inch sheet of plywood. The trim worked great to edge the board. On the inside if the trim, the metal is like what you would find in a box of staples. The metal is grooved so it will break away when cut. This allows you to more precisely cut the trim to fit your project. The outer coating is a flexible PVC plastic that is easy to cut and mold into position. Great buy.
4 Stars By Dennis Udink on 2017-11-26
There was some wasted space under one of the dinette seats
I used this to finish the edges of a hole I cut into the thin particle board in my camp trailer. There was some wasted space under one of the dinette seats, and I cut a hole out in order to store the dogs' food, leashes, toys, etc. The trim finished off the opening nicely and it's stayed in place for the past several months without any issues. I still have plenty leftover and will find a use for it.
5 Stars By David Joiner on 2015-06-04
Worked great for me
I used this to line the ventilation cut-outs in the metal battery compartment in my RV. The cables pass through the vent openings and I was concerned with the cable rubbing on the unfinished edges of the cutouts. The fit is excellent, nice and snug so I am not worried about it moving around. You have to be careful when you cut it to trim any slivers of sharp aluminum from the cut. Just had to buy way more than I needed but I am glad to have it.
5 Stars By WillJ on 2016-02-25
I used this to line the sharp edges of a ...
I used this to line the sharp edges of a motorcycle ramp that I turned upside down and use as a channel to guide the tires. This edging keeps the sharp metal edges from cutting into the sides of the tires. It is a little hard to install but seems to be very well in place and I don't have to worry about it coming of or sliding around.
5 Stars By Morehead on 2018-04-23
Trim lok edge trim
Used this trim lok to finish the edge around the powder coated aluminum mesh I cut for my FJ Cruiser. Makes my install look finished and complete with no sharp edges. Nice clean look. Very easy to install and stays in place. Happy customer